Mechanical Trade Lead Job | Doha

The post holder will be an experienced Mechanical Technician and Supervisor responsible to the Forward Deputy Maintenance Manager (FDMM).

The post holder requires an excellent understanding of the approved data set and is competent to supervise personnel carrying out maintenance instructions in accordance with the organisation’s regulatory framework.

Deputising for the FDMM during periods of absence, assuming their responsibilities as required.

Deputising for the Rectification Controllers during periods of absence, assuming their responsibilities as required.

Responsibilities:

The effective day-to-day management of Forward Maintenance Mechanical trade specific manpower and equipment resources, in accordance with policy and priorities laid down by the Maintenance Manager to provide sufficient safe and serviceable aircraft to meet the flying tasks.
Advising the FDMM of any engineering or supply problems likely to jeopardise flight safety or significantly affect the published flying programme.
Advising the FDMM of any practice, procedure or system which threatens the safety or quality of the Forward Maintenance logistics effort.

Core Activity:

Ensuring that all personnel under their management are suitably trained and authorised for their primary duties and maintain and record their required levels of currency.
Ensuring Mechanical trade personnel are trained and able to carry out full and comprehensive handovers of technical issues and management information to the oncoming shift using the respective Trade Diary.
Ensuring that Mechanical trade personnel complete all mandated training (HF, CoC, etc).
Ensuring new Mechanical trade arrivals complete the necessary requirements, training and authorisations to enable them to carry out their primary duties in a timely manner
Training of and maintaining appropriate Mechanical maintenance incident team cover during flying operations.
Managing the Forward Maintenance Mechanical manpower shift lists to meet the flying programme and ensure all required personnel administration is carried out and submitted within the appropriate timeframe (e.g. leave planner etc.).
Monitoring the submission of Mechanical TPRFs to develop and maintain accurate approved data.
Monitoring the standard of Mechanical facilities and ensure any defects are reported to the Support and Training Management.
Monitoring standards of Mechanical personnel across forward maintenance.
Monitoring Mechanical usage of approved data for accuracy.
Ensuring the Mechanical Trade Desks are able to effectively liaise with Maintenance Operations, Sqn Operations and Fleet Planning for appropriate allocation of aircraft to the flying programme and integrate fully the forward maintenance and operational activities.
Ensuring Oversight Checks are carried out of all forward Mechanical maintenance operating areas on a scheduled basis and are reported into the FDMM.
Completion of weekly Mechanical trade standards and practices quality checks (physical and ESS).

Other Activities:

Act as the Mechanical trade specific point of contact for all internal and external agencies and organisations.
Undertake any duties/tasking or instructions as directed by the FDMM.
In conjunction with the FDMM undertake strategic Mechanical reviews, challenge current practices to identify potential areas for improvement and assist in the forward planning of forward maintenance to develop efficiency and continuous improvement.
In conjunction with the Forward Maintenance Managers ensure the compilation and timely release of Mechanical Flt Safety and Ground Incident Reports and all required Follow Up reports.
Co-ordinate with forward maintenance Training and Support Management all Mechanical QA audit reports within the agreed timescales.
Identify any Mechanical malpractice that could affect the airworthiness of the assigned aircraft fleet and highlighting and documenting the issue/concern to the FDMM and/or appropriate authority.

Key Accountabilities:

Performance indicators – Ensure the effective management of regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programs. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate
Procedure/standards – Manage the Mechanical trade team compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance
Safety Management System – Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 Mechanical team(s), together with the proactive analysis, mitigation and management of hazards
Completion of activities – Ensure all Part 145 Mechanical activities are appropriately documented and airworthiness records are maintained on relevant systems (IT / paper based). Ensure suitably qualified, experienced and authorised personnel perform all Part 145 Mechanical activities. Ensure the integration of Part 145   activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the Mechanical team.
Management System Assurance – Ensure Mechanical maintenance activities are compliant with the QAF governance and assurance framework, including supporting process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness
Statutory/Regulatory & Legislative requirements – Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO
Contractual Requirements – Comply with all applicable contractual requirements

Requirements

Qualifications/Functional Knowledge:

The post holder will be required to hold the following essential authorisations:

– Asset Manager

– Co-ordinate Aircraft and MWOs

– Download and Upload PMDS

– Resolve arisings from PMDS

– Independent Inspections (specify extent and undertake)

– Tow Typhoon

– Assessor for General and Trade specific authorisations as required.

Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (On a/c requirement)
Requires a minimum of 2 years working at Supervisor level prior to undertaking this role
On the Job Training Instructional Techniques
Requires broad and in-depth product knowledge/competency within own technical/subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application
Typhoon Mechanical Trade ‘Q’ Course or equivalent.
Ensure personal compliance with the risk assessments, SHE policies and procedures
Human Factors- Standard Course Specification.
E&PW Awareness- Standard Course Specification.
ITAR Awareness- Standard Course Specification.
IT Literate.
Driving licence

Air

Engineering

Experienced professionals

What we're proud of

Apply now Back to top

Company Culture

Life at BAE Systems

Within a growing network of around 100,000 colleagues in more than 40 countries, our teams bring together people with diverse skills, ways of thinking and backgrounds - while our work spans the depths of the ocean to the far reaches of space.

Tackling complex problems. Building innovative solutions. This is a place where you can make real change happen, for your career and the world.

Discover more

Want to know more?

Inclusion

We want everyone here to feel valued and empowered to thrive. Who you are should never define what you can do. We believe when you bring together different people and perspectives it inspires creativity and drives innovation, helping us fulfil our purpose and is integral to our culture. Everyone is heard and respected here.

Learn more

Learning and development

If you’re curious, hungry for more responsibility, and prepared to step out of your comfort zone, there are endless opportunities to grow with us. At every stage of your career our first-class training, coaching and development programmes, role models and mentors will help you embrace your potential and take the next step.

Learn more

Rewards and benefits

Great work deserves benefits that go beyond your salary. Whether it’s health, wellbeing, or financial security for you and your family – our flexible benefits help you focus on what’s important to you.

Learn more

Making an impact

Together we embrace every opportunity to have a positive impact. On the world around us, our communities, and each other.

Learn more